Samson C01 XLR Condenser Mic Review

Today we're not looking at another microphone from Samson, the C01.

For this review, I have the mic connected directly to the Focusrite Scarlett 2i2 (2nd Gen), with the input gain set at approximately 12:00. I have done no post processing on the audio, it is all raw, but the audio was slightly boosted in final cut pro X to simply make the audio easier to listen to.

If you are interested in this microphone, it will set you back around $75 on Amazon

What's In the Box

  1. Plastic Storage Box

  2. Microphone

  3. Microphone Mount

  4. 5/8" to 3/8" Stand Adapter

  5. Documentation


  1. Frequency Response: 40Hz - 18kHz

  2. Polar Pattern: Hyper Cardioid

  3. Sensitivity: ~ -33dB

  4. Impedance: 200-ohms

  5. Max SPL: 136dB

Performance / Features

The build quality of this microphone is perfectly fine given the price. It has an all metal body as well as a sturdy metal mesh grill, and a good amount of weight to it coming in at 1.1 lb. On the front of the microphone you'll find a blue LED light that lights up when phantom power on your interface is turned on and on the bottom you'll find the XLR port. 

The frequency response is listed as 40Hz - 18kHz. The bass frequencies begin to roll off at 150Hz but peak again at around 95Hz before rolling off the remainder of the low frequencies. The mids and presence fluctuate quite a bit with a minor boost around 600-700hz, a peak at around 1.7kHz, 2.7kHz, and 5.5kHz, with a broad boost from 6Khz to 12kHz. 

The polar pattern of this mic is Hyper-cardioid. This means that the front is sensitive and the rear of the mic has a small lobe of sensitivity with the dead spots around 112-degrees. 

The overall performance of this mic lacks. As far as a vocal mic it seems to lack significantly in the low frequencies, sounds a bit nasally, and has some minor sibilance issues as well. On the electric guitar, I had to put the mic right on top of the amp to get some low end in the guitar, but it did end up sounding fairly decent. The acoustic on the other hand sounded brittle in the high end. Something that was not listed on the specifications sheet was the self noise, and when I was testing the mic, it seemed like a fairly big downfall of this mic. Finally, the tone of the mic all around was somewhat harsh and become painful to listen to after lengthy listening sessions. 


  • Pretty good build quality

  • Comes with a storage box


  • Subpar performance with self noise

  • Lacks in the low end

  • Sibilance issues

  • Harsh tone that became painful after long listening sessions



I was somewhat let down by this microphone. I have really enjoyed the majority of Samson mics on the market, but this one didn't meet my expectations. The frequency response left a lot to be desired in that it left the voice and guitar sounding thin and harsh. The self noise also makes this unusable for professional applications as well.

Due to how competitive the mic market is, I don't think I can recommend this mic. There are too many mics in this price range for me to recommend a mic that doesn't perform amazingly.

If you have any additional questions about this microphone, leave them on the youtube video, and I will try to reply ASAP. 

Buy the Samson C01

Buy the Focusrite Scarlett 2i2 (2nd Gen)