Razer Kraken Pro Analog Gaming Headset Review / Test

Today we're looking at another gaming headset from Razer; the Razer Kraken Pro Analog Gaming Headset.

I think the main selling point of this headset is the universal compatibility. It is marketed as compatible with Playstation 4, Xbox One, Windows and Mac! 

For the majority of this review, I have the Razer Kraken Pro connected directly to my MacBook Pro with the input gain set at 10%. In my sound preferences, I checked the meter, and I was not clipping, however, you will hear that there is an exorbitant amount of clipping. I tried dropping my gain all the way down to 1% and I was still encountering a clipped sound signal even though the meter was showing sound levels no greater than 50%. 

If you are interested in this microphone kit, it will set you back between $50 & $80 on Amazon

What's In the Box

  1. Headset (1.3m TRRS Cable Permanently Attached)
  2. TRRS Splitter
  3. Documentation

Specifications

Headphones

  1. Drivers: 40mm
  2. Frequency Response: 20Hz - 20kHz
  3. Impedance: 32-Ohms

Microphone

  1. Polar Pattern: Uni-directional
  2. Frequency Response: 100Hz - 10kHz

Performance / Features

The build quality of this headset is nothing spectacular. The majority of the construction is plastic, but it does feel like relatively high quality plastic when compared to a $20 headset. The headphones do offer a nice fit; providing a decent amount of give and just the right amount of pressure to ensure that they fit the majority of people's heads. The ear cups are very soft and comfortable. While the headband does not offer too much padding, it did not become uncomfortable at any point of my testing. The microphone articulates which is something that is important in a gaming headset, and it also retracts when not in use. The 1.3m cable is standard rubber, in the middle you have a control panel to adjust headphone volume and mute the microphone, and the cable terminates into a single 3.5mm TRRS jack.

The headphones offer a full frequency response ranging from 20Hz - 20kHz. The 40mm drivers push a lot of the lower frequencies which seem to drown out a lot of the higher end. However, the audio does not sound muddy. If you are a big fan of bass-heavy headphones, then this may be a good option for a gaming headset. If you're looking for an even sounding, flat frequency response set of headphones, this is not going to be for you.

The microphone, simply put, is not good. It has a harsh tone to it which almost hurts your ears. On the mac it was clipping no matter what gain I set it at. All around, it's just not a usable microphone for most applications. If you are looking to podcast, do voice overs, or do video game commentaries with this headset, look some where else. BUT, if you are going to be using it exclusively for online gaming, this mic may be perfect for that. Due to the harsh tone, it will allow your voice to cut through the games audio and ensure you're not lost in the mix.

Pros

  • Comfortable
  • Mic Articulates / Retracts
  • Heavy bass without sounding muddy
  • Microphone cuts through game sound due to harsh tone

Cons

  • Bad sounding microphone for any professional application
  • Bass overpowers higher frequencies
  • Headphone volume rocker is sensitive, and easy to accidentally hit

Conclusion

Overall, I can only recommend this for a single use case: Online Gaming. That's what it was designed for, and that's where this headset will live. It has good sounding headphones (if you like bass), and the microphone will cut through the game sound to ensure you're heard. On the other hand, if you want to use the microphone for Skype calls, voice overs, commentary, podcasts, etc, this headset will not cut it and you need to continue searching.

If you have any additional questions about this microphone, leave them on the youtube video, and I will try to reply ASAP. 

Buy it on Amazon
US: http://amzn.to/2kfOS0M
UK: http://amzn.to/2klnAbN